Сапсан-Контроль

General purpose drive unit

 

Compact general-purpose drive unit  ROSA designed to service as main structure module for range of high-performance soil-saving agricultural machines and vehicles applied for forest husbandry and environmental protection.

 

 

Configuration

 

This light four-wheeled AWD power plant consists of:

• Turbo-chartered diesel
• Transmission with wheel-torque transfer by CV joints
• Hydraulic servo steering

 

Power plant packages on the base of two reference model - standard or long-base cab

 

Long-base cab power plant

 

 

Characteristic	Parameter value
Vehicle type	Wheeled, two-axle, self-propelled
Wheel arrangement	4x4
Length, mm	3500
Width, mm	2350
Height, mm	2300
Engine type	Turbo-charged diesel
Power take-off admission and transmission mode	Rear-rear axle, drive belting
Drive train, quantity of gear: Forward gear Rear gear	4 1
Design speeds on 175/ 80R16 tires in engine shaft rated speed, km per h: Minimal Maximal	5 25
Tare weight. kg	935 - 1100
Base, mm	2725
Wheel tread, mm	2050
Road clearance, mm, at least	250
Lowest turning radius, m, not above	6
Spreader box extended height, mm, not above	30
Fuel tank capacity, liter, at least	35
Towing  equipment fully loaded mass, kg, less	400

 

 

Power plant performance use as complex part confirming a numerous of trials, that was carry out in 2005-2008 years.

 

Diesel engine

When the engine mount inside cab particularly, than all requirements about noise, vibration and salon environment must be satisfy.

 

Engine characteristics

KUBOTA                                                                   ISUZU

Characteristic	Parameter value
Engine trademark	Isuzu	Kubota
Engine type	Diesel, four cylinders, row
Engine power, kW (hp)/ rpm	60 (82) / 4400	33 (44,9) / 3000
Torque, Nm/ rpm	168 / 2400	118 / 2000
Engine displacement, cm³	1686	1498
Idle frequency rpm	780- 880	1000 - 1100
Maximum rotations per minute rpm	5100	3200
Piston diameter x piston stroke, mm	79 x 86	78 x 78.4
Compression ratio	22	23
Turbo-charge	Available
Fuel injection pump assembly	Power-adjustable

 

Viable solutions

 Simple and viable solutions of light and sturdy frame, volume-space structure and wishbone wheel suspension provide use-friendly and dependable service.

 

Power plant cab

 

Configuration concept - two seats salon made from fiberglass in firm monocoque.

There are many requires implement in this construction such as suberb visibility, convenient location of operating control, impermeability, air intake by salon filter.

Cab's modular construction and design solutions patented by the National Intellectual property Center of the Republic of Belarus and the Federal Service for Intellectual property, patents and trademarks of the Russian Federation.

 

Air-conditioning unit

Air-conditioning unit mount on the roof. It provide comfort indoor temperature 18 -22 ºC.

 

 

Discuss on forum